Stripping line tip

A Great Place to ask questions about or share information concerning Baits, Tackle, Rods, Reels, Techniques, etc.
Post Reply
Bobbys Toy
Posts: 24
Joined: Wed Feb 18, 2015 11:48 pm
First Name: Bob
Last Name: Jones

Stripping line tip

Post by Bobbys Toy »

Hello all,
This is a simple way to strip your reels for the up coming fishing season. I have used commercial strippers and found them to more trouble than they worth. My method is a simple soda bottle, a screw, lock nut and cordless drill. I use a 16oz soda bottle and find that I can strip off approx. 6000 feet line with one bottle. Here is the tools and method:
I used a screw on soda bottle cap. drilled a hole thru it that fit a #10 machine screw 1 1/2 inches long. I used a 3/16 drill bit. Then I used a small flat washer on the inside, put the screw thru the hole and washer, placed a large flat washer over the screw and cap on the outside and help it all together with a #10 lock nut.
cap1.jpg (73.16 KiB) Viewed 3302 times
cap2.jpg (196.53 KiB) Viewed 3302 times
Screw the cap onto your soda bottle and place it in your cordless drill. Tie your line onto the bottle and hit the trigger. Once you complete the first reel just tie the line of the second reel to the tag end of the first line and continue until the bottle is full. A 16oz bottle will do about 6 reels for me of 12 and 20 pound mono. You can strip the line off the bottle if wish and recycle the line. I put the hole this in a plastic bag and put in in our recycle bin.
This is what it should like:
pic3.jpg (219.46 KiB) Viewed 3302 times
Bob Jones
Bobby's Toy

Last Dime
Site Admin
Posts: 182
Joined: Sun Feb 08, 2015 6:50 am
First Name: Bob
Last Name: Ksionzek

Re: Stripping line tip

Post by Last Dime »

Great Tip, Bob! Thanks for sharing.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest